Thay tôn nhà xưởng (tôn Bluescope Steel, tôn chống axit, tôn cách nhiệt PU, cán sóng Lockseam, Cliplock). Replacement of factory tole (Bluescope Steel tole, Acid proof roofing sheets, PU insulation panel, Lockseam roofing sheet, Cliplock roofing sheet).

Thay mái tôn nhà xưởng hay thay mái tôn nhà tiền chế là công việc thường phải làm trước và sau mỗi mùa mưa và có có ý nghĩa quan trọng trong nhiều công trình nhà ở, nhà xưởng, nhà máy, kho hàng, siêu thị, công ty….

Vì sau một thời gian dài sử dụng khi dã phải chịu quá nhiều tác động từ bên ngoài như gió, bão,mưa,… mái tôn không thể tránh khỏi hư hại và bị ăn mòn kim loại, bị dột hoặc thậm chí là bị tốc mái,…

Một số nguyên nhân chính để thay mái tôn nhà xưởng

1. Dột mái tôn ở vị trí nối mái, nối máng, thoát nước nhỏ

  • Nguyên nhân: Dột từ những vị trí nối tôn, nhất là phía cuối máng thoát nước có độ dốc máng nhỏ, máng thoát nước bé, ống thoát nước nhỏ hoặc khoảng cách đặt ống nước quá xa nên lượng nước mưa thoát không kịp dẫn đến tràn ra ngoài, thấm qua các vị trí nối tôn.
  • Biện pháp khắc phục:
    • Bước 1: Xác định bề rộng của mái tôn là bao nhiêu m2. Để tính lượng nước mưa khi trời mưa xuống máng và ống thoát nước mới thoát được hết.
    • Bước 2:  Máng tôn nhỏ thì thay máng tôn to hơn, bổ sung hoặc thay ống thoát nước to hơn, dày hơn vào các vị trí cần thay lắp.
    • Bước 3: Bơm keo Silicon và các vị trí nối máng, nối mái, cổ ống, đầu vít….tránh cho nước mưa thấm qua.

2. Dột mái tôn ở các vị trí thủng tôn

  • Nguyên nhân:  Dột từ những vị trí tôn bị thủng lỗ do lâu ngày gặp phản ứng điện hóa bị ăn mòn tôn hoặc do sử dụng loại tôn kém chất lượng gặp nắng nóng giãn ra, lạnh co đột ngột làm thủng lỗ trên mái càng lâu càng nhiều. Lưu ý nếu thủng quá nhiều thì có thể phải thay tôn mới.
  • Biện pháp khắc phục:  Nếu vị trí mái tôn thủng thì ta sửa như sau ( đường kính lỗ thủng  ≤ 30 cm)
    • Bước 1: Xác định vị trí tôn thủng.
    • Bước 2: Cắt một miếng tôn to hơn vị trí thủng.
    • Bước 3: Dán hoặc bắt đè miếng tôn cắt lên vị trí thủng.
    • Bước 4: Bơm keo Silicon lên các mép tiếp giáp xung quanh giữa miếng tôn dán và mái tôn được dán hoặc đầu vít tôn bị bắt đè lên.

3. Dột mái tôn ở vị trí mũ đinh bị rỉ, bật mái

  • Nguyên nhân:   Dột từ những mũ đinh: mái tôn thường xuyên tiếp xúc với nước mưa nên lâu dần tại vị trí đinh ốc vít gắn trên mái bị ăn mòn gây tôn rỉ sét, mục ngày càng rộng ra. Khi có gió thổi mạnh các mũ đinh bị bật lên dẫn đến hở gioăng sẽ gây rò rỉ nước hoặc mái tôn bị lật lên.
  • Biện pháp khắc phục:
    • Bước 1: Chuẩn bị keo Silicon và súng bắn vít  ( ốc vít, súng bắn Silicon….)
    • Bước 2: Bắn vít bổ sung vào các vị trí ốc vít bị han rỉ, bị bay mũ… để đè tấm tôn xuống.
    • Bước 3: Bơm keo Silicon vào các đầu ốc vít bị han rỉ, vào các lỗ bắn ốc vít cũ, bơm keo lên các đầu ốc vít mới bắn bổ sung

Tuy nhiên, việc tìm đến dịch vụ sửa chữa mái tôn uy tín và chất lượng của Công ty Xây dựng ATPCons chúng tôi sẽ giúp các bạn giải quyết được nhiều phiền toái không mong muốn do mái tôn hỏng hóc mang lại một cách hiệu quả và nhanh chóng với mức giá tốt nhất. Công ty chúng tôi với hơn 10 năm kinh nghiệm tại khu vực TP.HCM nên dù ở đâu, chỉ cần bạn gọi một cuộc điện thoại, đội ngũ nhân viên của chúng tôi sẽ có mặt ngay lập tức để hỗ trợ các bạn.

Sự nhạy bén, nhanh nhẹn và kịp thời, cùng kiến thức và kinh nghiệm làm việc chuyên nghiệp của chúng tôi hứa hẹn sẽ không khiến các bạn phải thất vọng. Mọi rắc rối liên quan đến mái tôn của bạn sẽ được giải quyết nhanh chóng để giúp việc sinh hoạt và công tác, sản xuất của bạn diễn ra bình thường.

Các hạng mục công việc thay mái tôn nhà xưởng như:

  • Đóng và lợp lại mái tôn
  • Thay mái tôn nhà xưởng
  • Nhà xưởng, nhà kho , nhà thép tiền chế
  • Văn phòng làm việc tại các công ty
  • Nhà ở chuyên gia
  • Căn tin, nhà xe và các công trình phụ

Liên hệ tư vấn, báo giá thay mái tôn nhà xưởng

Nếu bạn đang xem xét, tìm kiếm đơn vị thay mái tôn nhà xưởng của doanh nghiệp mình, hãy tham khảo đơn giá sửa chữa, xây dựng nhà xưởng công nghiệp của chúng tôi ngay sau đây.

 

Replacing the factory corrugated iron roof or replacing the prefabricated corrugated iron roof is a job that must be done before and after each rainy season and has an important meaning in many housing projects, factories, factories, warehouses, supermarkets, etc. the company….

Because after a long time of use, when it has been subjected to too many external influences such as wind, storm, rain, etc., the corrugated iron roof cannot avoid being damaged and corroded metal, leaked or even accelerated. roof,…

Some main reasons to replace the corrugated iron roof of the factory
1. Draining the corrugated iron roof at the position of connecting the roof, connecting the gutters, and having small drainage
Cause: Drainage from corrugated iron joints, especially at the end of the drain with a small slope, a small drain, a small drainage pipe, or the distance of the water pipe is too far, so the amount of rainwater cannot drain in time. spill out, seep through corrugated iron joints.
Remedies:
Step 1: Determine the width of the corrugated iron roof is how many m2. To calculate the amount of rainwater when it rains, the troughs and the new drainage pipes are drained.
Step 2: Smaller corrugated iron troughs should be replaced with larger corrugated iron troughs, supplemented or replaced with larger and thicker drainage pipes in positions that need to be replaced.
Step 3: Pumping silicone glue and connecting troughs, roof connections, pipe necks, screw heads, etc. to avoid rainwater seeping through.
2. Leaking corrugated iron roofs in places where corrugated iron is perforated
Cause: Dumping from places where the corrugated iron is perforated due to long-term exposure to electrochemical reactions corrosion of the corrugated iron or due to the use of poor quality corrugated iron exposed to the hot sun, it expands and contracts suddenly, causing the hole in the roof to last longer. more. Note that if the hole is too much, it may have to replace the new corrugated iron.
Remedy: If the location of the corrugated iron roof is perforated, we fix it as follows (hole diameter ≤ 30 cm)
Step 1: Determine the location of the perforation.
Step 2: Cut a piece of corrugated iron larger than the puncture site.
Step 3: Stick or press the cut corrugated iron on the puncture site.
Step 4: Pump Silicon glue on the adjacent edges between the glued corrugated iron sheet and the glued corrugated iron roof or the screw head is overridden.
3. Strip the corrugated iron roof at the location of the rusty nail cap, turn on the roof
Cause: Drop from nail caps: corrugated iron roof is often exposed to rain water, so over time at the position of screws and screws attached to the roof, it corrodes, causing corrugated iron to rust, the item is getting wider and wider. When there is strong wind, the nail caps are turned up, leading to the opening of the gasket, which will cause water leakage or the corrugated iron roof will be flipped up.
Remedies:
Step 1: Prepare Silicon glue and screw gun (screws, Silicon gun ..)
Step 2: Shoot additional screws in the locations where the screws are rusty, damaged, etc. to press down on the corrugated iron sheet.
Step 3: Pump silicone glue into the rusted screw heads, into the old screw holes, inject the glue on the newly added screw heads

However, finding a reputable and quality corrugated iron roof repair service of ATPCons Construction Company will help you solve many unwanted troubles caused by damaged corrugated iron roofs effectively and efficiently. quickly with the best price. Our company has more than 10 years of experience in the Ho Chi Minh City area, so wherever you are, just make a phone call, our staff will be there immediately to assist you.

Our acumen, agility and timeliness, along with our professional knowledge and experience, promise not to let you down. Any problems related to your corrugated iron roof will be resolved quickly to help your living, work and production go on normally.

Work items replace the roof of the factory such as:
Close and re-roof the corrugated iron roof
Replace the roof of the factory
Workshops, warehouses, pre-engineered steel buildings
Office work at the company
Expert housing
Canteen, garage and ancillary works
Contact for consultation, quote replace the roof of the factory

If you are considering, looking for a unit replacement of corrugated iron roof for your business , please refer to the unit price of repairing and building our industrial factory right here.

Contact Me on Zalo
0911.996.996